PCB driver, SMT (Surface Mounted Technology), 15V power supply, 5V(TTL) or 15V(CMOS) control signals, short circuit protection via VCE monitoring, soft short circuit turn-off, supply undervoltage protection, error memory, error output signal (high or low logic possible), interlock of TOP/BOTTOM
(deadtime adjustable) isolation voltage 4kVAC (1700V) Visol 2,5kV (1200V)
VCE trip level is preset to 5,2V, for the SKHI 23/12 and 6,3Vfor the SKHI 23/17. 5V or 15V input signals, high or low logic error signal feedback, easy adjustment of RGon/off offers flexible adaptation according to the application. This adaptation can be easily done by soldering additional electronic devices onto reserved pins on the PC- board.
SKHI 23 is coated with varnish to protect against moisture and dust. VGon = +15V, VGoff = -8V.
Informations de base :
Marquage fabricant | SKHI23/12R |
Type de composant: | Driver IGBT |
Kategorie | Driver |
Configuration: | Low+High side |
Spécifications: | 2-channels |
Nombre de circuits | 2 ks |
Type de cas: | Modul |
Cas [inch] : | SEMIDRIVER |
RoHS | Oui |
REACH | Non |
NOVINKA | N |
RoHS1 | Ano |
Emballage et poids :
Unité: | pcs |
Poids: | 138.70368 [g] |
Type d’emballage: | BOX |
Petit paquet (nombre d'unités): | 1 |
Paramètres électro-physiques:
Udc-sup.min (Min.Supply DC Voltage) | 14.4 [V] |
Udc-sup.max (Max.Supply DC Voltage) | 15.6 [V] |
Uisol (@25°C/1min/50Hz) | 2500 [V] |
UCE (sat) (@25°C) | 5.2 [V] |
UDC-OUT (off/min) | -8 [V] |
UDC-OUT (on/max) | 15 [V] |
IOUT puls (Log.1=ON) (TA=25°C) | 8 [A] |
IOUT puls (Log.0=OFF) (TA=25°C) | 8 [A] |
du/dt (critical rate of rise of on-state voltage) | 75000 [V/µs] |
Input Logic Level (Ugs level) | 15V |
f max | 100 [kHz] |
Paramètres thermiques et mécaniques:
Tmin (température minimale de travail) | -25 [°C] |
Tmax (température maximale de service) | 85 [°C] |